NEC DT920, User Manual

Page: 60 / 104

OPERATION
50
Category Icon
Etc
No Category
3.
Set the priority flag.
Set the priority for the number used for
making call at search result screen.
If you want to set priority for the telephone
number, select “Enable”.
When the priority is not set to the
telephone, the call is made to the lower
registration telephone number.
TO CHANGE GROUP NAME
1.
Press local soft key 1 (Option) at phone book
screen.
2.
Select
“ 4 Group Settings”.
3.
Select the group to change name.
4.
Select “ 1 Name”.
5.
Input the group name.
Up to 32 digits can be registered for
each dial number.
6.
Confirm the changed group name.
Group menu is indicated again.
TO DELETE
1.
Refer to “
TO SEARCH PERSON
” and display
search result.
2.
Press local soft key 1 (Option) with focused data.
3.
Select “ 5 Delete”
If you select “ 6 Delete All”, it is possible
to delete all data in the personal
phonebook.
4.
Press local soft key 4 or Enter key at confirm
window.
If you want to cancel, press local soft key
1.
5.
Delete message is displayed.
SYSTEM PHONE BOOK
Following explains the operation of system
phonebook, “common/personal directory service“.
This feature is a common/personal directory service
which is supported by UNIVERGE SV9300
communication server. This feature allows a
terminal user to search desired party by name. After
searching the called party, the user can originate a
call to that party.
The feature is set to the terminal by
system data setting at initial
installation. For details, please contact
the system administrator.
The dialed numbers of common
directory are set by system data setting
at initial installation, For details, please
contact the system administrator.
TO START SYSTEM PHONEBOOK
There are 2 operations to start System Phonebook.

FROM LOCAL SOFT KEY
1.
Press local soft key 2 (Phonebook) at favorite
screen.
In case that Personal phonebook is
set,
Personal phonebook is displayed.
For details, please contact the system
administrator.