TERMINAL SETUP
34
When the backup process ends in
failure, “Download Failed!” is displayed
on the LCD. Check to see the following
points and retry backup.
CHECK POINTS
ACTIONS
Check whether the
download file is placed
in the folder of the
server or not.
Place the download
file in the specified
folder of the server.
Check if the file name
you entered is match
with that stored in
FTP/TFTP/HTTPS
server.
Enter the correct file
name which is stored
in FTP/TFTP/HTTPS
server.
Is a download file a
terminal data file of the
same model?
Terminal data of the
different model can
’t
be downloaded.
Please download
terminal data of the
same model.
Check whether IP
address/address (URI)
of FTP/TFTP/HTTPS
server is correct or not.
Set the proper IP
address/address
(URI) of
FTP/TFTP/HTTPS
server.
CHECK POINTS
ACTIONS
Check whether the
power to
FTP/TFTP/HTTPS
server and network
equipment is ON or
not.
Turn on the power.
Check whether the
LAN cable is
connected securely.
Reconnect the cable
securely.
If the retry of downloading fails many
times, the terminal may be in failure.
For details, please contact the system
administrator.
Other than above conditions, if
"Download Failed!" or "Upload Failed!"
is displayed, please contact the system
administrator.
TO SET Bluetooth
DEVICE
Following items are available.
Equipment
Product Name
Headset
Voyager 5200
Voyager Legend
Voyager Edge
Jabra Talk 45
Speaker
Jabra Speak 810
Bluetooth
device is available for
DT930 (Touch Panel model).
Please contact dealer about available
Bluetooth
devices. If you do not use
the recommended device, there may
be a case that it cannot connect with
terminal or operate properly.
Please keep the distance between the
terminal and a Bluetooth
device within
30 meters.
A maximum of 16 Bluetooth
devices
can be installed on the same floor
(approximately 10 square meters)
At first, to enable the terminal to be connected with
Bluetooth device.
TO ENABLE Bluetooth
function
1.
Display the Menu
screen, and select “Settings”
2.
Select “ 6
Option Device
”.
3.
Select “ 1
Bluetooth
”
4.
Select “ 1
Bluetooth Mode”
5.
Select “ 2
Enable”
PAIRING AND CONNECTING
1.
Display the Menu
screen, and select “Settings”