TERMINAL SETUP
27
The default setting is
“ 0 Automatic”. If
the “ 0 Automatic” is selected, this
feature is activated in accordance with
the system data setting.
REGISTER A HOME URL
Screen display is not only set by “Home screen settings”,
but you can set the phone to access XML application right
after start up by register an address information of the
application as a home URL. This section explains how to
display menu screen and an example of screen display
when the phone starts.
XML application also can be used by
register to the Favorite screen as a
shortcut of the service. For registering
shortcut or using shortcut, please refer
to
.
In addition, shortcuts of the service can
be used when address information has
been registered as the service. For
details, please contact your
administrator.
The register of the home URL is
performed at the initial setting stage.
For detail, please contact your
administrator.
START UP THE PHONE
The phone automatically access the home URL,
and displays the received XML application.
The following XML application image is
different depends on the using
application.
Press the menu button to display the menu screen.
The screen that is displayed as the portal icon in
that time is the XML application screen that
registered as the home URL.
“Portal” is usually displayed as an
application name registered by external
application.
When the home URL has registered,
the screen of home URL is displayed
instead of the favorite screen by press
the local soft key 1. Therefore, the
favorite screen cannot be displayed.
The effects of the home settings when
there is the home URL registration are
as follows:
■
Set to
“Automatic”
The screen obtained from the home
URL is displayed.
■
Set to
“Favorite screen”
The screen obtained from the home
URL is displayed.
■
Set to
“Call screen”
The call screen is displayed.
■
Set to
“Line screen”
The line screen is displayed.
