NEC DT900 Series User Manual Download Page 68

Page: 68 / 214

B A S I C S E T U P W I T H T H E M E N U S A N D C U R S O R PA D

4-48

DT900/DT900S Series Phone User Guide

Note:

You cannot change these settings on your phone. To change any of these
settings, contact your system administrator.

To view the phone settings

Press the Menu key.

Select

Status.

Select

Terminal Information to view the hardware and firmware information for your

phone, or select

Network Information to view the network information for your

phone, or select

SIP Information to view the settings for your phone and SIP account

on the network.

Use the cursor pad or the



Up and



Down softkeys to scroll through the phone

settings.

To view the phone settings on the ITK-32LCGS and ITK-32TCGS

Select the Multi settings icon.

Figure 4.6

Multi settings icon

Press the Settings icon.

Figure 4.7

Settings icon

Select

Status.

Select

Terminal Information to view the hardware and firmware information for your

phone, or select

Network Information to view the network information for your

phone, or select

SIP Information to view the settings for your phone and SIP account

on the network.

Use the cursor pad or the



Up and



Down softkeys to scroll through the phone

settings.

To view the firmware information for your phone

Press the Menu key.

Select

Status.

Select

Terminal Information.

Use the cursor pad or Up/Down softkeys to scroll to the Firmware Version screen.

Press the Exit softkey to return to the Status menu.

Note:

You cannot change these settings on your phone. To change any of these
settings, contact your system administrator.

If you need to upgrade to the latest firmware version available for your phone on your
network, restart your phone.

To view firmware information on the ITK-32LCGS and ITK-32TCGS

Select the Multi settings icon.

Summary of Contents for DT900 Series























































































































































































































Search results

Summary of Contents for DT900 Series

Reviews:

Related manuals for DT900 Series

Brands by name

Popular brands

NEC DT900 Series, User Manual

Search results

Summary of Contents for DT900 Series

Reviews:

Related manuals for DT900 Series

Brands by name

Popular brands