NEC DT830CG User Manual Download Page 88

Page: 88 / 281

STEP 7: When “Remove complete!” is displayed,

Press

, and remove the USB de-

vice from the terminal.

• TO SET USABILITY

The procedure below shows how to set the operation of
Help key while pop-up window is displayed.

STEP 1: Display the

Menu

screen, and select

Setting

STEP 2: Select

User Setting

Select an item by one of the following operations.
• Highlight an item by using

UP/DOWN

soft key,

and press

• Press .

STEP 3: Select

Usability

Select an item by one of the following operations.
• Highlight an item by using

UP/DOWN

soft key,

and press

• Press .

Note

If the USB device is not removed successfully,
"Remove failure!" appears. In that case, Press

OK, and do the procedure from

STEP 6

again.

[Remove]

Remove complete!



Menu

Data Backup/Restore

[Setting]

Download

User Setting

1/1

Summary of Contents for DT830CG


























































































































































































































































































Search results

Summary of Contents for DT830CG

Reviews:

Related manuals for DT830CG

Brands by name

Popular brands

NEC DT830CG, User Manual

Search results

Summary of Contents for DT830CG

Reviews:

Related manuals for DT830CG

Brands by name

Popular brands