NEC DT730, User Manual, Page: 38 / 216

28
Installing a Directory Card
A directory card (also known as an abbreviated dialing
table) can be attached to the telephone sets. The
directory card can be used to record often dialed
numbers or other important information. Directory
cards are available as options.
STEP 1: As shown in the figure below, push the direc-
tory card holder into the grooves on the termi-
nal until they snap into place.
Note:
To remove the directory card, pinch the two
sides of the directory card holder inward until
the tabs release and pull the holder out of the
grooves.
STEP 2: Remove the protective sheet from the cover.
STEP 3: Attach the cover to the directory card and
then attach it to the directory card holder.
Attaching Handset
STEP 1: Insert the coiled cord plug into HANDSET
connector on the back of the telephone until
you hear it clicks.
STEP 2: Thread the coiled cord through the groove as
shown in the figure below.
Cover
Directory Card
Holder
Grooves
Telephone
Coiled Cord
Groove
HANDSET
Connector
Modular Plug