NEC DT730 User Manual Download Page 211

Page: 211 / 216

201

TO ENABLE/DISABLE BACKLIGHT

The following explains how to enable/disable the
backlights of LCD and digit keys.

The backlights illuminate (for approximately 10
seconds) when the user presses any key or lift the
handset.

STEP 1: From the

Home

sceen, click

User Settting

→

Display

→

Back Light

STEP 2: Make a selection from the following list.

STEP 3: Click

button to save the change to the

database.

STEP 4: The following dialog appears. Click

but-

ton on the dialog.

Menu Item

Meaning

1. Automatic

Backlights of LCD and digit keys are
enabled.

2. Disable

Backlights of LCD and digit keys are
disabled.

3. Enable

Backlights of LCD and digit keys are
enabled.

Summary of Contents for DT730

























































































































































































































Search results

Summary of Contents for DT730

Reviews:

Related manuals for DT730

Brands by name

Popular brands

NEC DT730, User Manual

Search results

Summary of Contents for DT730

Reviews:

Related manuals for DT730

Brands by name

Popular brands