NEC DT730, User Manual

Page: 102 / 216

92
SECURITY MODE
DT730 Series has the Security ( ) key which
prevents information leakage from terminal. While the
terminal is locked, Security Lamp lights up.
• TO LOCK THE TELEPHONE
Before placing DT700 Series in Security mode, you can
set a password. For details on the password setting,
see TO CHANGE PASSWORD in chapter 3 Terminal
Setup.
Press ( Security ) key on DT730 Series. The
followign message is displayed on LCD.
Press ( Enter ) or OK soft key to place DT700
Series in Security mode.
When DT730 Series is placed in Security mode,
Security Lamp lights red and the screen saver will
be activated.
• TO UNLOCK THE TELEPHONE
Display the Password Entry screen by either of the
following operations.
• Press any key while the screen server is
activated.
• Press ( Security ) while the screen server
is activated.
Enter the password and then press ( Enter ) or
OK soft key. Security Lamp is extinguished and
Security Mode is canceled.
Security Lamp lights up.
Security lock will be released.
Please input a password.
BK
Cancel OK
Press Security Key.
Cancel OK
Security Lock?
BK Cancel OK
Security lock will be released.
Please input a password.