manualshive.com logo in svg

NEC DT410 Series, User Manual

Share
Download
NEC DT410 Series User Manual Download Page 113

 105 

ADUSTING HEADSET RINGER 
TONE VOLUME

 

 

You can adjust the ringer tone volume for the headset
in idle/busy status.

To Adjust the Ringer Tone Volume in Idle 
Status

STEP 1: Press the 

Headset

 key while in idle status to

switch from headset mode to handset mode,
and the 

Headset

 key lamp turns off.

STEP 2: Receives a call from another line.

STEP 3: Press 

Up/Down

 (

) key while a ringer tone

is on.

For Ringer Tone Volume in Busy Status

If other lines are accommodated in the telephone as a
subline, the ring tone volume is lower than normal
when other lines receive calls during a call with the
headset on.

HOW TO USE THE WIRELESS 
HEADSET

 

 

When using Wireless Headset, you can answer a call,
conduct a conversation, or disconnect
the call with hooking operations. This section explains
about the terminal operation using Wireless Headset.

To Answer a Call

STEP 1: Press 

Hook

 key of the Wireless Headset

while the ringing tone is on, and the 

Hook

 key

lights red. Depending on the installation
phase, you can answer the call by pressing

 key instead of 

Hook 

key.

STEP 2: Press 

Hook

 key to end the call, and the 

Hook

key turns off.

Note:

To provide a ringer tone from the headset, the
system configuration is required. For details, con-
tact the system administrator.

Note:

Ringer tone volume can be adjusted only for the
wired headset which is connected to the terminal
headset connector.

Note:

Ringer tone volume in busy status cannot be
changed when the ringer tone is set to come from
both the speaker and the headset. For details,
contact the system administrator.

Note:

When you receive an incoming call from other
line while in a conversation with headset, the
ringer tone volume for other lines in headset
mode can be set the same as the normal volume.
For details, contact the system administrator.

DT830 DT430/410

Note:

The Hook key of Wireless Headset must be pro-
grammed in advance. For the programming of
Headset key, contact the system administrator.

Note:

For details on how to connect a telephone and
Wireless Headset, see the manual attached
to the Wireless Headset.

DT830 DT430/410

Answer

Summary of Contents for DT410 Series




































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands