manualshive.com logo in svg

NEC DT410 Series, User Manual

Share
Download
NEC DT410 Series User Manual Download Page 112

 104 

STEP 4: If  transferring  party hangs up, that station’s

number appears in the center of recipient’s
display.

TERMINAL OPERATION USING THE 
HEADSET

 

 

The following procedure explains how to operate a ter-
minal using the headset. While using the headset, the
operations equivalent to answering and ending a
phone call are available by pressing the 

Headset

 key. 

To Originate a Call

STEP 1: Press the 

Headset

 key, and the 

Headset

 key

lights red.

STEP 2: Line key lights green and receive dial tone.

STEP 3: Dial a desired telephone number, after the

target party answers the call, you can start a
conversation.

STEP 4: Press 

Headset

 key to end the call, and the

Headset

 key turns off.

To Answer a Call

STEP 1: Press the 

Headset

 key while the ringing tone

is on, and the 

Headset

 key lights red.

STEP 2: Press the flashing line key to start a conver-

sation with another line. Depending on the in-
stallation phase, you can answer the call by
pressing 

 key instead of line key.

STEP 3: Press 

Headset

 key to end the call, and the

Headset

 key turns off.

Note:

Headset key must be programmed in advance.
For the programming of Headset key, contact the
system administrator.

Mic                                  >>>

1:25 PM    MON  22  SEP  2014

TRANSFER 2000

DDD 3

Transferring station

DT830 DT430/410

Note:

To switch to handset mode, lift the handset and
press Headset key during a conversation

Note:

To switch to headset mode, press Headset key
during a conversation.

Answer

Summary of Contents for DT410 Series




































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands