background image

DS1000 02.10.09 Release Notes

Enhanced Features in 02.10.09

DS1000 Release Notes

37

02.10.09

1.

Press 

PROGRAM

. You  see:

2.

Press 

HF REPLY

. You  see:

The first line of the display indicates whether Handsfree Reply is on or off.

3.

To turn Handsfree Reply on (if it is off), press 

ON

.

OR

To turn Handsfree Reply off (if it is on), press 

OFF

.

When  you answer a voice-announced Intercom call (if Handsfree Reply is off):

You hear a single beep in your speaker and the voice of the calling party. The 

ICM

MIC

, and 

SPK

 keys are on.

To answer the voice-announcement, lift the handset.
OR
Press 

MIC

 to turn Handsfree Reply back on (for this call only).

MIC Key Controls Both Handset and Handsfree Microphone

Microphone Mute lets the keyset user turn off their phone’s handset or Handsfree microphone at 
any time. While the extension is on-hook, Microphone Mute mutes the Handsfree microphone. 
While off-hook, Microphone Mute mutes the handset microphone. In prior software versions, 
Microphone Mute could only turn off the keyset’s Handsfree microphone. (Note that lifting the 
handset while the feature is active automatically cancels Microphone Mute.)

Night Service / Night Ring

Using #KP To Set Up A System Mode System Key

The following steps allow an extension user to implement the User Programmable Feature option 

#KP

 to set up a System Mode System key:

1.

Dial 

#KP

.

2.

Press the key you want to p 

HOLD

.

3.

Dial 18 + 

HOLD

.

4.

Press 

CLEAR 

HOLD

, then 

CONF

 + 

SPK

 to exit.

Summary of Contents for DS1000











































































Reviews: