33
No.
Symptom
Check
Refer to
page
6
Images are sometimes interrupted or
displayed with a delay.
As far as possible, set the MultiPresenter Stick in a position in
which it is visible from the device from which images are being
sent.
Also try moving the device from which images are being sent
closer and changing the direction of the antenna.
−
Such symptoms can occur happen if the network is busy.
−
Select the optimum channel at [CHANNEL] under [SETTINGS]
→
[ADMINISTRATOR MENU]
→
[WIRELESS LAN] on the Multi-
Presenter Stick’s web server screen.
28
29
7
Videos do not play smoothly.
From the MultiPresenter application on the device from which
the video is being sent, select [SETTINGS]
→
[IMAGE], then
lower the [PICTURE QUALITY] and [MAXIMUM FRAME RATE]
values.
Note that depending on the OS you are using, the [MAXIMUM
FRAME RATE] item may not be displayed. Also, depending on
the your wireless LAN environment, it may not be possible to
achieve good performance.
−
8
You would like to restore the
MultiPresenter Stick’s settings to the
factory defaults.
Display the MultiPresenter Stick’s settings menu and select [RE-
SET].
31
9
You would like to limit access to web
share images.
Set the [ACCESS PASSWORD] item under [SETTINGS]
→
[AD-
MINISTRATOR MENU]
→
[WEB SHARING] on the MultiPresenter
Stick’s web server screen.
26
10
You would like to limit access to the
administrator menu on the web server
screen.
Set the [ADMINISTRATOR] item under [SETTINGS]
→
[ADMIN-
ISTRATOR MENU]
→
[PASSWORD] on the MultiPresenter Stick’s
web server screen.
27
