Section 3: Features
Product Description
95
3
Automatic Conference on Hang Up
A Class of Service option is available, depending on your software version, which will allow or
deny an extension user from automatically setting up a Conference/Tandem Trunking call upon
hanging up the phone.
Transfer Call Into Conference
An extension with Barge In capability can Transfer a call into an existing Conference. This would
allow, for example, an attendant to locate co-workers and then Transfer them into an existing tele-
phone meeting. There is no need for the attendant to locate all the parties at the same time and
sequentially add them into the Conference.
Change CONF to a Transfer Key
An option is available which allows an extension’s CONF key to be programmed for Conference or
for Transfer. When set for Transfer, the user places a call on hold, dials the extension to which it
should be transferred, the presses the CONF key. The call is then transferred. When set for Confer-
ence, with an active call, the user presses the CONF key, places a second call, then presses the
CONF key twice. All the calls are then connected.
Conference Feature Enhanced
The Conference feature has been enhanced with the ability to:
●
Allow a user in an active Conference call to add another party.
Older software would not allow a call to be added to an existing Conference unless the
call was put on hold or park and the Conference reestablished, then adding all parties into
the Conference at once.
●
Break up a Conference call by pressing Hold.
With older software, using line keys, if you set up a 3-party (1 internal user and 2
trunks) Conference, if you placed the Conference on hold and pressed one of the line keys,
the conference would restart. You could not undo a Conference once it was set by simply
placing Hold.
●
Drop a trunk or trunks from the Conference.
While in a Conference, with older software, you could not drop one of the parties.
Conference, Voice Call/Privacy Release
Description
Voice Call Conference lets extension user’s in the same work area join in a trunk Conference. To
initiate a Voice Call Conference, an extension user just presses the Voice Call Conference key and
tells their co-workers to join the call. The system releases the privacy on the trunk, and other users
can just press the trunk’s line key to join the call.
Aspire S
Aspire M/L/XL
•
NTCPU provides 32 conference circuits, allowing each
block to have any number conferences with any number
of internal or external parties conferenced as long as the
total number of conference channels used does not
exceed the limit of 32.
•
NTCPU provides 2 blocks of 32 conference circuits,
allowing each block to have any number conferences
with any number of internal or external parties confer-
enced as long as the total number of conference channels
used does not exceed the block’s limit of 32.