manualshive.com logo in svg

NEC Aspire S IntraMail, System Manual

The NEC Aspire S IntraMail system manual is available for free download from manualshive.com. This comprehensive manual offers detailed instructions and guidance on effectively utilizing the Aspire S IntraMail, ensuring seamless communication within your organization. Empower your team with this essential manual, conveniently accessible and ready for download.

Share
Download
background image

Master Mailbox

IntraMail  for Aspire System Guide

Chapter 2: Features

◆

117

2

Master Mailbox

Description

IntraMail uses Master Mailboxes as the over

fl

ow destination for Department Calling Group over

fl

ow. If a 

trunk call to the Department Group master (pilot) number is unanswered, the call can optionally route to the 
Master Mailbox. There are 16 available Master Mailboxes. Each Master Mailbox can be one of four mailbox 
types: Call Routing, Announcement, Subscriber, and Directory Dialing. 

■

Call Routing Mailbox
This gives the Department Group caller additional dialing options if their call is unanswered.

■

Announcement Mailbox
This plays a prerecorded announcement to the Department Group caller if their call is unanswered. 
The Announcement Mailbox can then hang up or provide additional dialing options.

■

Subscriber Mailbox
The Department Group caller can leave a message in the group’s master mailbox. A Member of the 
group can then retrieve the message later on.

■

Directory Dialing
If the Department Group call is unanswered, Directory Dialing allows the caller to reach an extension 
by dialing the 

fi

rst few letters in the extension user’s name.

Master Mailboxes can be the Department Group over

fl

ow destination for the following types of calls:

■

A 

Screened Transfer

 from the IntraMail Automated Attendant to the Department Group master (pilot) 

number. See 

Programming Department Calling Group Over

fl

ow for Screened Transfers (TRFs)

 on 

page 179.

■

An 

Unscreened Transfer

 from the IntraMail Automated Attendant to the Department Group master 

(pilot) number. 

Programming Department Calling Group Over

fl

ow for Unscreened Transfers 

(UTRFs)

 on page 181.

■

A 

Direct Inward Line

 to the Department Group master (pilot) number. See 

Programming Department 

Calling Group Over

fl

ow for a DIL to the Master Number

 on page 183.

Automated Attendant Callers can also access a Master Mailbox. When the mailbox is set up as a Subscriber 
Mailbox, an Automated Attendant caller can do a remote logon or leave a Quick Message in the Master 
Mailbox. If the Master Mailbox is a Call Routing, Announcement, or Directory Dialing Mailbox, you can set 
up a GOTO action in the active Dial Action Table to enable single-digit access to the Master Mailbox.

Using a Master Mailbox as an Additional Resource

You can also use a Master Mailbox as an additional resource (for example, as an extra Directory Dialing or 
Call Routing Mailbox). When used this way, the Master Mailbox does not have to be assigned to a Depart-
ment Calling Group. See 

47-03-02: Master Mailbox Number

 on page 206 for more on how to set this up.

Related Features

Announcement Mailbox

 (page 28)

A Master Mailbox assigned as an Announcement Mailbox provides an announcement to Department 
Group callers when they over

fl

ow to Voice Mail.

Call Routing Mailbox

 (page 54)

A Master Mailbox assigned as a Call Routing Mailbox provides routing options to Department Group 
callers when they over

fl

ow to Voice Mail.

Dial Action Table

 (page 62)

You can set up a GOTO action to a Master Mailbox set up as an Announcement, Call Routing, or Direc-
tory Dialing Mailbox.

Directory Dialing

 (page 66)

You can use Master Mailboxes for Directory Dialing.

Software
Note:  

 Assigning a Master Mailbox as a Directory Dialing Mailbox requires software version 2.64 or higher.

Summary of Contents for Aspire S IntraMail











































































































































































































































































Reviews:

No comments

Related manuals for Aspire S IntraMail

Brands by name

Popular brands

Load more brands