NEC ASPILA EX, Feature Manual

Page: 364 / 1098

Toll Restriction
350 Features Aspila EX Software Manual
Abbreviated Dialing can bypass or follow Toll Restriction. If you allow many users to pro-
gram Abbreviated Dialing, consider Toll Restricting the numbers they dial. If only adminis-
trators can program Abbreviated Dialing, Toll Restriction may not be necessary. You can
separately restrict Group and Common Abbreviated Dialing.
• Call Digit Counting
Use Call Digit Counting to limit the number of digits local callers can dial. You can use this
option to prevent users from accessing local dial-up services. For example, set the Maximum
Number of Digits in Local Calls to 7 to limit local callers to dialing the exchange code (NNX)
and local address (nnnn) only. The system provides 4 tables in which you can make entries
for this option. The range is 4-30 digits.
• Toll Call Digit Counting
With Toll Call Digit Counting, you can limit the number of digits long distance callers can
dial. This lets you prevent callers from dialing extensively into long distance dial-up services.
You can make four entries (4-30 digits).
• Toll Free Trunks
Certain trunks can be completely unrestricted, such as the company president’s Private Line.
Users can place calls on Toll Free Trunks anytime -- to anywhere, without inadvertently being
toll restricted.
• PBX Call Restriction
Toll Restriction programming lets you enable/disable PBX Call Restriction and enter PBX
access codes. You only need to do this if your system is behind a PBX and you have trunks
programmed for behind PBX operation. Refer to PBX Compatibility feature for the specifics.
Conditions
(A.) If a Toll Restriction Class has the same entries in both a permit and restriction table, the sys-
tem does not restrict the call.
(B.) Toll Call Digit counting may prevent users from taking advantage of long distance automated
services like ACD and automated Technical Service.
(C.) Toll Restriction is applied when accessing ARS.
Default Setting
Disabled.
Programming
•14-01-08 : Basic Trunk Data Setup - Toll Restriction
For each trunk, enter 0 to enable Toll Restriction; enter 1 to disable Toll Restriction.
•20-06-01 : Class of Service for Extensions
For each extension, assign a Class of Service (1-15).
•20-08-02 : Class of Service Options (Outgoing Call Service) - Trunk Calls
For each Class of Service, decide whether to enable (1) or disable (0) an extension’s ability to
place an outgoing trunk call.
•20-13-20 : Class of Service Options (Supplementary Service) - Account Code/Toll Restriction
Operator Alert
When toll restriction is violated, determine if the operator should be notified. (0=disable,
1=enable)