78K0/Lx3 - See it!
User’s Manual
U18759EE2V0UM00
51
(9) [Setup] command
The [Setup] menu allows you to make settings related to flash memory rewriting
according to the user environment and to set command options. Each time the GUI
software is started, the most recently used parameter file (.PRM) is read and the
settings are displayed. The [Setup] menu allows you to modify the settings of items
other than those items consisting of shadowed characters according to the user
environment.
(a) Standard
setup
This menu is used to set the environment for rewriting the flash memory of the target
device.
The mode of communication with the target, the operating clock, and so forth differ
depending on the device used. For details, refer to the manual of the device used, when
making settings.
The window shown below is opened.
Figure 42: Device Setup Window - Standard
This window shows all basic options that can be set in accordance with the user
environment and target device.
[ OK button]
Clicking the OK button saves the settings on the Standard and Advance menus and
closes the window.
[ Cancel button]
Clicking the Cancel button closes the window without saving the settings on the
Standard and Advance menus.
