78K0/Lx3 - See it!
User’s Manual
U18759EE2V0UM00
48
8.4 Menu Bar
Depending on the actual device status and device type, some menu items may be enabled or
disabled.
8.4.1 [File] menu
Clicking the [File] menu displays the pull-down menu as shown below.
This menu mainly contains commands related to file operation.
Figure 39: [File] Menu
(1) [Load] command
The [Load] command allows you to select a program file.
The selected program file is programmed into the flash memory of the device by
executing the [Program] command or [Autoprocedure(EPV)] command.
Figure 40: HEX File Selection Window
The file selection window for program loading displays the most recently used directory to
which a user program has been loaded. After a user program is loaded, a checksum
calculation is made and the result is displayed in the programmer parameter window.
[
Open button]
Selects a user program as a program to be written to the target device.
[ Cancel button]
Closes the window without selecting a program.
