NEC 4001-20B - Voclan Advertisement Display User Manual Download

Page: 97 / 151

5. Using On-Screen Display

TEM

ESCRIPTION

Control Panel Lock

Set Control Panel Lock On/Off.

Note:

This Control Panel Lock does not affect the remote control

functions.

When the control panel is locked, pressing and holding the

Exit

button on the projector cabinet for about 10 seconds.

The setting will change to Off.

DynamicBlack
(TM)

DynamicBlack improves the black level of the projector. Black
level is the darkest part of a picture and varies between viewing
devices and environments.
Set DynamicBlack on/off.

Note:

DynamicBlack is only available when

Lamp Select

is set to

Dual

Remote Sensor

Set Remote Sensor fields.
Range: Front/Back, Front, Back

LAN
Settings

Opens LAN preferences tab (see LAN Settings on page

Standby Mode

Select Standby Mode.
Range: Normal and Power-saving

PC Control

Enables the path selection for PC control.
Select PC Control. Range: PC CONTROL or LAN.

Orientation

Orientation enables you to set how the projected image is displayed.

Select from the following:

Desktop Front

– Standard forward facing projection (Default setting).

Desktop Rear

– Standard rear projection. Enables the projector to produce the image

from behind the screen by reversing the image.

Ceiling Front

– Forward facing ceiling mounted projection. Enables ceiling mounted

projection by inverting the image.

Ceiling Rear

– Rear ceiling mounted projection. Enables ceiling mounted projection

from behind the screen by inverting and reversing the image.

Summary of Contents for 4001-20B - Voclan Advertisement Display
























































































































































Search results

Summary of Contents for 4001-20B - Voclan Advertisement Display

Reviews:

Related manuals for 4001-20B - Voclan Advertisement Display

Brands by name

Popular brands

NEC 4001-20B - Voclan Advertisement Display, User Manual

Search results

Summary of Contents for 4001-20B - Voclan Advertisement Display

Reviews:

Related manuals for 4001-20B - Voclan Advertisement Display

Brands by name

Popular brands