6
V
o
ice/Videophone Calls
Making an International Call
<WORLD CALL>
WORLD CALL is a service where you can use your
DOCOMO mobile phone to call overseas.
You applied for “WORLD CALL” when you started to
use FOMA services. (Except if you did not wish to
apply for it.)
z
You can make a call to approximately 240 countries
and regions worldwide.
z
“WORLD CALL” charges are billed with your
monthly FOMA call charges.
z
In addition to directly dialing a phone number, you
can make an international call by adding “+” or
selecting “Int’l call” or “Prefix numbers” from the
function menu of the enter phone number screen or
Phonebook/Redial/Dialed calls/Received calls
detail screen.
z
Services are not available in some billing plans.
Dialing a phone number to make an
international call
1
Dial the phone number in the
following order: 010
→
Country
code
→
Area code (City code)
→
Other party’s phone number
Dial the other party’s phone number excluding
“0” at the beginning of the mobile phone number
or area code (city code). However, to call to Italy,
etc., “0” is required.
You can also make an international call by
dialing the phone number in the following order:
009130
→
010
→
Country code
→
Area code (City
code)
→
Other party’s phone number.
2
r
The international call is made.
Simple procedures for making
international calls
z
You can store country codes and international call
access codes in “Int’l dial assistance”.
●
Using “+” to make an international
call
“+” changes to “IDD prefix code” set in “Auto int’l call
set”, and you can make an international call without
dialing the IDD prefix code.
z
Since “Auto int’l call set” under “Int’l dial assistance”
is set to “ON” (automatically added) by default, the
IDD prefix code is automatically dialed.
1
On the standby screen, dial the
following: + (
0
(1 second or
longer))
→
Country code
→
Area
code (City code)
→
Other party’s
phone number
Dial the other party’s phone number excluding
“0” at the beginning of the mobile phone number
or area code (city code). However, to call to Italy,
etc., “0” is required.
2
r
X
“Dial”
The international call is made.
■
To make a call without converting “+” into
the IDD prefix code
X
“Original Phone No.”
■
To cancel calling
X
“Cancel”
z
Depending on the other party’s communication
conditions or signal quality, you may not be able to
switch the calls and the call may be disconnected.
z
When the call is switched, the first dialed or
received call is stored in the Redial/Dialed calls or
Received calls.
<When switching from voice call to videophone
call>
z
If the caller is using i-mode, i-mode is
disconnected and the call is switched to
videophone.
z
If the other party is using packet communication
(including i-mode), the message “No Switch”
appears and the calls cannot be switched.
z
You cannot switch the calls when “Call Waiting” is
active.
For WORLD CALL, call at general inquiries
provided on the back of the manual.
International videophone calls can be made to 3G
area-compatible overseas handsets by pressing
o
(V.phone) after following the dialing procedure
below.
z
Visit the NTT DOCOMO website for countries
and operators.
z
In some types of the other party, international
videophone is not available or the other party’s
picture on FOMA is distorted.
N