Nec Casio DT700, User Manual, Page: 157 / 390

. . . . .
P R O G R A M M A B L E K E Y S
Speed Dial and Programmable Keys
DT700 Phone User Guide
8-139
Using the Feature Key
Note:
Network configuration determines how the Feature key behaves on your
network. Contact your system administrator.
The Feature key on the telephone is used to program Speed Dial Keys and access
the Microbrowser (if supported).
Figure 8.20 Feature Key
Depending on the network configuration for your system, the Feature key is operated
in one of the following ways.
Feature Key on a system without Microbrowser Support
Pressing the Feature key opens a screen that lets you enter the programmable mode
on your phone.
Figure 8.21 Feature key splash screen
You can still answer incoming calls while your phone is in the programmable mode
using the telephone handset or by pressing the Speaker or Answer key on your
telephone. You phone will exit the programmable mode when you answer the call or
press the Line Key to view the caller information.
To exit the programmable mode, press the Exit softkey.
Feature Key on a system with Microbrowser Support
Pressing the Feature key opens a screen that lets you enter the programmable mode
on your phone, or go to the Microbrowser on your phone.
After you press the Feature key, press the Program soft key to enter your phone’s
programmable mode, or press the Home soft key to go to the Microbrowser home
page.
Figure 8.22 Feature key splash screen
If you don’t press the Program softkey within 2 seconds, the Microbrowser will
automatically open.