Nec Casio DT700, User Manual

Page: 140 / 390

B A S I C P H O N E O P E R A T I O N
Call Transferring and Conferencing
7-122
DT700 Phone User Guide
Figure 7.43 Transfer Key
This puts the current call on hold so you can start to transfer the call.
2
Use the key pad to dial the telephone number to which the call is to be transferred.
3
Press the Dial softkey, or wait a few seconds for the call to be automatically dialed.
Figure 7.44 Transfer to Number
4
After the other party answers the call, you can speak to that person before you transfer
the call.
5
Press the Transfer button to transfer the original call to the new party. You will be
disconnected from both calls.
Blind transfer
A blind transfer is when the call transfers immediately to the dialed extension without
waiting to see if the extension rings or is picked up.
If the other caller does not answer or rejects the call, the call is routed to voice mail or
according to forwarding conditions. If there is no voice mail or forwarding conditions
set for the line you transfer to, the call will continue to ring.
1
While on a call, press the Transfer key.
Figure 7.45 Transfer Key
This puts the current call on hold so you can start to transfer the call.
2
Press the Blind softkey, then use the key pad to dial the telephone number to which the
call is to be transferred.
Figure 7.46 Blind softkey
3
Press the Dial softkey, or wait a few seconds for the call to be automatically dialed.