Nec Casio DT700, User Manual

Page: 136 / 390

B A S I C P H O N E O P E R A T I O N
Call Transferring and Conferencing
7-118
DT700 Phone User Guide
Conference Reminder Tone
A Conference Reminder tone may be enabled on your phone. If enabled, a reminder
tone is played periodically when you have established a 3-party conference call from
your telephone. You may also hear the phone if you a called party on another 3-party
conference that was established from another phone enabled for the conference
reminder tone.
To conference two calls
1
While on a call, press the Conf key, or press the Conf or Conference softkey.
Figure 7.32 Conf key on DT710 (ITL-2E) phone
Figure 7.33 Conf softkey on DT710 (ITL-6DE) phone
Figure 7.34 Conference softkey on DT730 (ITL-8LD, ITL-12D, ITL-24D,
and ITL-32D) phones
2
Use the key pad to dial the telephone number of the party to be joined in the conference.
3
Press the Dial softkey to initiate the call, or wait a few seconds for the call to be
automatically dialed.
a.
If you decide not to complete the conference, the new call can be terminated by
pressing the EndCall softkey.
4
Press the Conf key, or press the Conference softkey after the other party has answered
their phone to complete the conference.
Figure 7.35 Conference Calls