Connect to Power
Your
nebo
link
should be powered by a constant DC power source of
between 8 and 36 volts, so that the battery remains charged.
Connect the
RED
wire to the power source (+)
Connect the
BLACK
wire to ground (
-
)
Recommended option for motor boats kept on the water
Some vessel
’
s initial movement may not be detected by the
accelerometer, leading to a delayed start to logging. If you have a
motor boat kept on the water
, consider connecting the
white
wire to
a circuit that is live when you
’
re underway, like an ignition circuit
(connecting to a tacho may be an easy option).
This will result in logging commencing when the engine(s) are started,
and will finish when they are turned off.
Mounting
Your
nebo
link can be placed inside a locker or the dashboard, but keep
in mind that reception from the GPS satellites is required. Mounting
deep in the engine room isn
’
t a good idea!
