Nebia Spa Shower 2.0, Setup Manual

Page: 11 / 14

13
Choose the dock position
Choose a dock location around hip height on the wall, allowing for full downward
travel of the sliding arm and rotation of the temperature valve handle. Consider
the ideal side spray from the wand when it is resting on the dock .
Alternatively, you can install the wand without the dock (go straight to step 16) and
install the dock in your desired location after your first Nebia shower.
Position the dock
at your hip height
If others will be showering
with Nebia, you can
purchase additional
docks
to place at their respective
hip heights.
Visit nebia.com/install
to learn more.
14
Install the dock 15
Connect the wand
Insert the hose into the bottom of the
bracket . You will hear a click. Remember
to give the dock adhesive 24 hours to set.
Then, place the wand on the dock , with
the on/off button facing you.
Congratulations, you are all set!
Caution:
The Nebia logo must be
positioned upright so that the magnetic
array is properly aligned.
The wall surface for the dock must
be clean and dry. Use the provided
alcohol wipe to clean and prep the
surface. Allow the alcohol to dry for 1
minute before continuing. For dirtier
surfaces, we recommend using a
scouring pad or sponge (i.e. Scotch Brite)
prior to using the alcohol wipe.
Adhere the
dock
in your desired location,
and press firmly for 1 minute. To ensure
secure adhesion, wait
24 hours
before
placing the wand on the dock and 8 full
hours
(or overnight) before showering.
10