Neato Vacuum
Quick Start Guide
1
Plug in the charging base
Place the base 3 feet from any corner and
make sure there is space in front of the
charging base for the Neato Vacuum to
dock.
NOTE: Ensure that the base is sitting up
against a wall and is not tilted forward.
2
Select language and charge
your Neato Vacuum
Place your Neato Vacuum up against the
charging base.
The LCD screen will light up and prompt
you to select a language for the display
screen. Use the up and down arrows to
select the language, then press SELECT.
Once the language is selected, the light
around the START button will light up to
let you know it is charging. When it is
solid green in approximately 2 to 3 hours,
it’s ready to clean.
3
Start cleaning!
Press START to wake up the Neato
Vacuum (you may have done this while
taking it out of the box).
Press START again to begin vacuuming
your floors!
NOTE: For best performance, remove
small items from your floors, and secure
any loose cables.
Register now at
www.NeatoRobotics.com
/register
to get future
software updates
and discounts!
