Neat WALL Famiy, Technical Handbook

Page: 41 / 56

neat
41
NE41 11014-02 v4.1 WALL - Technical Handbook
5.12.4 Technical info
Values in this section are read only.
5.13 Config tab
The Config tab handles settings for the unit and enables the unit to be part of a
D-POS system.
Only available for ROOM devices.
Picture 43. Config tab.
5.13.1 Radio parameters
Unit ID code
The unit’s ID code is programmed to the unit when manufactured but can be altered
here. The format must be four hexadecimal digits (0001-FFFE) or blank.
If the field is blank, the unit ID code is not changed during a write session.
The unit ID code can also be changed from the Communications menu, see "5.6.2
Change unit ID code".
Two ore more units must NOT have the same Unit ID code!
Ignore received acknowledge
As default the unit is set to NOT ignore acknowledges sent by other NEAT radio units.
• Yes, function on
• No, function off (default)
Max number of short transmissions
Default = 3
Max number of long transmissions
Default = 3