INKA, IOR, REPO & LINK
2.1.3 IOR Programmer, Radio Input Tab
When you have selected the product model you will see the following screen. Depending on which
product model you have chosen, the text in some of the fields may be gray showing that these fields
are disabled, and the corresponding parameter can not be changed for the current product model.
Some fields may contain dashes only (---). This means that the parameter in question is not used.
111
124
127
130
129
128
126
125
123
122
121
131
141
142
143
144
145
146
147
148
149
150
151
152
153
154
155
156
157
158
159
160
101
112
137
140
139
138
136
135
134
133
132
102
113
103
114
104
115
105
116
106
118
117
107
108
109
110
Explanation of controls
101-108
Radio ID codes for external equipment
109
Radio ID code used by equipment sending specifically to this unit
110
Indicates whether all radio codes or only pre-programmed (101-109) shall be received
111-118
Push buttons for receiving radio ID codes
121-130
Activation of relay output
131-140
Radio transmission and choice of radio ID code for outgoing alarm
141-150
Radio ID code used for outgoing alarm
151-160
Alarm type for outgoing alarm
The fields are arranged in rows. In the text field farthest to the left, the radio code of an alarm
transmitter is entered. The rest of the fields in the same row determine what actions will be performed
when a message with this radio code is received.
Technical Handbook for the IOR Family (firmware v20.x), document number NE41 06007-02 v1.0
14