background image

NE41 09010-02 v3.0

D-SERVER

 Technical Handbook

neat

49

5.2.3  Entities

Picture 64. 

Entities sub menu

Devices

Associate a device to an owner (e.g. radio code "28AF" (SMILE-ID) to 

"Apartment 1")

Device group names

A) Create one or several groups which the personnel can log in to 

(e.g. Personnel Day and Personnel Night)
B) All devices must belong to one or more groups (e.g. "Apartment 

1-5")

Device group definitions

B) All devices must be sorted into one or more groups (e.g. "28AF" to 

"Apartment 1-5")

Alarm reasons

Predefined alarm reasons. It is possible to add more alarms reasons 

manually. See NE60 06001-01.

Alarm reason group names

Predefined alarm reason groups. It's possible to create more alarm 

reason groups manually.

Alarm reason group defini-

tions

Define which alarm reasons that should belong to an alarm reason 

group.

Position group names

Create one or several position groups.

Position group defitintions

Define which 

Positions

 that belongs to a 

Position group

.

System mode names

Modify or create a new schedule.

Time schedule

Define the schedule (e.g. Monday: Day start at 07:00 and Night 

starts 21:00)

Task registration

Naming the different tasks. Feature can be enabled from System 

parameter (

feature-task-registration-enabled

).

NOTE! This feature requires COBS C3110 or SMART1 handsets.

Table 35. 

Entitites sub menu items

Summary of Contents for D-SERVER





























































































































Reviews: