Neat D-SERVER Technical Handbook Download

Page: 43 / 124

NE41 09010-02 v3.0

D-SERVER

Technical Handbook

neat

4.2.4 Backup Network Configuration

Browse to the

network

folder which can be found in the

admin

folder to backup the

Network Configuration.
The interfaces file contains the network configuration. To backup your network

configuration copy the file to a safe location.

Picture 58.

D-SERVER network (interface) settings file

This action requires logging in with the service account.

4.2.5 Backup SIP server configuration

Browse to the

opensips

folder which can be found in the

admin

folder to backup

the SIP server Configuration.
The folder has three (3) files and sqlite.db stores the table with the SIP server

configuration. To backup your configuration copy all the files to a safe location.

Picture 59.

D-SERVER SIP server configuration files

This action requires logging in with the service account.

Summary of Contents for D-SERVER





























































































































Search results

Summary of Contents for D-SERVER

Reviews:

Related manuals for D-SERVER

Brands by name

Popular brands

Neat D-SERVER, Technical Handbook

Search results

Summary of Contents for D-SERVER

Reviews:

Related manuals for D-SERVER

Brands by name

Popular brands