Nova Eclipse TG930 - Users Manual
46
10. MAINTENANCE
Normal maintenance consists of little more than keeping the gage surfaces
and probes clean. The probes and cables should be inspected
periodically, and replaced, if excessively worn.
Battery life depends upon the type, freshness, and quality of the batteries
used, and, to a lesser extent, upon some of the features used. If the
backlight is used extensively, battery life will be reduced. See Section 4.1,
Power On - Battery Check - Auto-Off.
To change batteries, loosen the large cap-screw on the bottom of the gage
with a coin or screwdriver. Remove the discharged batteries and replace
them with two new disposable AA-size alkaline or NiMH rechargeable
batteries. Install them with the positive (+) polarity inward. Replace and
tighten the battery chamber cap-screw. If the batteries are completely
discharged, removed, or replaced, re-establish calibration settings. Other
previous settings and logged data will be retained.
Nova Eclipse TG930 - Users Manual
47
11. SPECIFICATIONS
