NDS DTB01, User Manual

Page: 8 / 28

5. Fasten the display to the anchor bracket as required.
6. Connect the DTB01 display to an NDS device with N-
BUS.
7. SETUP INIZIALE
The DTB01 Bus Display allows you to set up and control
all networked N-BUS devices. When the display is
started for the first time, it searches for all connected
devices and displays the setup menus of all devices
(e.g. Suncontrol2 SCE, Lithium Battery Tempra) in
succession.
Follow the steps below to best set up your N-BUS
network using the DTB01 Display:
1. Connect the DTB01 display to an N-BUS device.
6
a. Insert the display
cover plate fixing
tabs into the
appropriate
housing of the
mounting frame
b. Lower the bottom
side of the display
cover plate by
making it stick to
the mounting
frame
c. Slide the display
cover plate
downwards in
relation to the
mounting frame