NDI BirdDog P200 User Manual Download Page 44

Page: 44 / 64

Receiving NDI® Video

There are many applications that support receiving the NDI® signal that P200 produces. Each application will vary

slightly on how you choose your source.

NewTek Studio Monitor

NDI® Tools is a free suite of applications designed to introduce you to the world of IP video and is available

here

The included Studio Monitor application allows you to monitor many NDI® sources on a standard Windows

computer. Once Studio Monitor is launched, right click anywhere in the interface and select your camera from the

dropdown list.

Once connected to P200, a configuration gear icon is displayed on the bottom right-hand side of the video display

providing shortcut access the BirdUI.

NewTek TriCaster Series

NewTek TriCaster series devices allow several NDI® sources to be received simultaneously, the number of

simultaneous connections depending on what model TriCaster you have.

To select the camera as a source on your TriCaster, click on the configuration gear icon below your desired source

location. From the displayed Input Setting dialog, select your camera source from the dropdown list.

Once connected to P200, a configuration gear icon displays next to the source dropdown window that provides

shortcut access the P200 BirdUI.

Summary of Contents for BirdDog P200

































































Search results

Summary of Contents for BirdDog P200

Reviews:

Related manuals for BirdDog P200

Brands by name

Popular brands

NDI BirdDog P200, User Manual

Search results

Summary of Contents for BirdDog P200

Reviews:

Related manuals for BirdDog P200

Brands by name

Popular brands