35
High Sensitivity
In this mode, the maximum gain increases, enabling to obtain a brighter output even in a darker en- vironment.
However, if the gain reaches high level, the image will have a large amount of noise.
Bright Level
The bright control adjusts both gain and iris using an internal algorithm, according to a brightness level freely set
by the user.
White Balance Tab
Cam White Balance
Auto: This mode computes the white balance value output using color information from the entire frame with a
range of values from 2500K to 7500K. This mode is the default setting.
Indoor: Sets the color temperature to 3200K.
Outdoor: Sets the color temperature to 5800K.
OPW (One Push White Balance): The One Push White Balance mode is a fixed white balance mode that may be
automatically readjusted only at the request of the user (One Push Trigger), assuming that a white subject, in cor-
rect lighting conditions can occupying more than 1/2 of the image. One Push White Balance data is lost when the
power is turned off. If the power is turned off, you'll need to reset One Push White Balance.
To select OPW:
1.
Place a white subject (i.e., sheet of white paper) in the center of the frame.
2.
Press the remote controller HOME button to activate the one-push white balance adjustment.
ATW (Auto Tracking White Balance): Auto Tracking White balance (2000K to 10000K), allows the camera to ad-
just the white balance according to the temperature of the light source illuminating the subject.
Manual: These two user modes allow you to manually set the color balance parameters.
Outdoor Auto: This is an auto white balance mode specifically for outdoors. It allows you to capture images with
natural white balance in morning and evening light. You can fine tune this setting using the MATRIX.
SVL Auto (Sodium Vapor Lamp Auto): This is an auto white balance mode that compensates for the orange light
from sodium vapor lamps. You can fine tune this setting using the MATRIX.
SVL (Sodium Vapor Lamp): This is a fixed white balance mode specifically for sodium vapor lamps. You can fine
tune this setting using the MATRIX.
SVL Outdoor Auto. (Sodium Vapor Lamp Outdoor Auto): This is an auto white balance mode specifically for out-
doors, which is compatible with sodium vapor lamps. You can fine tune this setting using the MATRIX.
The following parameters are available depending on the chosen mode.
Speed (white balance speed)
You can adjust the speed at which the camera reaches the white convergence point when AUTO1 or AUTO2 is
chosen. Values range from 1 - 5 in ascending speed.
Offset
The white convergence point can be shifted when WHITE BALANCE mode is AUTO1, AUTO2, or ONE PUSH. The
range is from –7 to +7. White balance is shifted toward blue when a negative value is chosen, and it is shifted toward
red when a positive value is chosen.
Matrix (Color Matrix)
You can emphasize or weaken a specific color region while keeping the white convergence point unchanged.
When you turn this ON, the following items are displayed for adjustment.
Select
You can choose an internal preset matrix for matrix calculation. You can choose from STD, HIGH SAT, FL LIGHT,
MOVIE, STILL, CINEMA, PRO, ITU709, and B/W. This becomes disabled when MATRIX is turned OFF.
