24
Recalling the stored settings
Press any of the POSITION buttons, 1 to 6, in which you have stored the settings.
Cancelling the preset memory
While holding down the RESET button, press the POSITION button from which you want to cancel the settings.
NOTE:
•
When the power is turned on, the camera starts with the settings stored in POSITION 1, so if you want
to retain the previous pan and tilt positions, store those positions in POSITION 1.
•
When you are storing or cancelling the settings in one POSITION, you cannot call up, store or cancel
the settings in another POSITION.
•
When the menu is displayed on the screen, you cannot perform the operation for storing, recalling, or
cancelling the setting. Be sure to return to the normal display before starting these operations.
Operating Multiple Cameras with the Infrared Remote Controller
1.
Using the DIP switch on the rear of the camera, assign a number to the camera (1, 2 or 3).
2.
Press the CAMERA SELECT button on the infrared remote controller that corresponds to the number set in
step 1.
3.
You can now operate the camera(s) specified by number. Every time you operate the camera(s) using the
infrared remote controller, the CAMERA SELECT button pressed in step 2 illuminates.
CAMERA SELECT
STD
PRESET
RESET
REV
Press a POSITION button
While holding down PRESET Button
