23
Shooting with Backlighting
When you shoot a subject with a light source behind it, the subject becomes dark. In such a case, press the BACK
LIGHT button. To cancel the function, press the BACKLIGHT button again.
NOTE:
The BACKLIGHT function is effective if MODE is set to FULL AUTO in the EXPOSURE menu of the camera.
Changing Resolution
1.
Press the RESOLUTION button.
2.
Use the arrow keys to navigate the displayed menu.
3.
Press Home to select.
4.
Screen will display ‘CHANGING…”
5.
Press Menu to exit.
Storing the Camera Settings Using Presets
Using the preset function, six sets of camera shooting conditions can be stored and recalled. The six sets of
camera shooting conditions can be stored and recalled by using remote controller. Up to 128 presets via protocol
programming.
This function allows you to achieve the desired status instantly, even without adjusting the following items each
time.
•
Pan/Tilt Position
•
Zoom Position
•
Focus Auto/Manual
•
Focus Position
•
AE Mode
•
Shutter control parameters
•
Bright Control
•
Iris control parameters
The settings stored using this function are recalled when the power is turned on.
1.
Press the RESET button to reset the pan/tilt position.
2.
Adjust the position, zooming, focusing and backlighting of the camera.
3.
While holding down the PRESET button, press any of the POSITION buttons, 1 to 6, in which you want to store
the settings.
•
Gain control parameters
•
Exposure Compensation On/Off
•
Exposure Level
•
Backlight Compensation On/Off
•
White Balance Mode
•
R/B Gain
•
Aperture Control
•
WD Parameter
