NDC BETA LaserMike LaserSpeed Pro 8500-4, Instruction Handbook Manual

Page: 233 / 348

LaserSpeed Pro 8500-4 Instruction Handbook: Ethernet Communication 8-9
Identifier Value Response Length (Bytes)
0 Blank 0 – These id's are ignored
1 IP Address 4
2 Ethernet Hardware ID 6
3
DHCP Ena-
bled/Disabled 1 (either 1 or 0)
4 Gauge Model Varies (Text String)
5 Serial Number Varies (Text String)
6 Host Name Varies (Text String)
7 Boot Loader Revision Varies (Text String)
8 Software Revision Varies (Text String)
9 Firmware Revision Varies (Text String)
10 Web Server Revision Varies (Text String)
others Reserved
8.9.5 Discovery Beacon Response Format

Protocol: UDP Broadcast

Source Port: 10003

Destination Port: Same as Discovery Beacon
The device response format is a UDP message to the same port from which the discovery beacon originated.
The response consists of a version string, followed by a list of values in response to the list identifiers in the
beacon message. Each response consists of three parts: the identifier, the length of the value (in bytes), and
the value. This sequence is repeated for each value.
The last byte of the value is followed immediately by the next identifier. Identifier bytes that are 0 are pad-
ding, and should be ignored.
16 blmfind_res_v0.0
0 1-12 Message Byte
Value
(text string)
id(0)
value(0)
length
value(0) id(n)
value(n)
length
value(n)
13 14 15...