_______________________________________________________________________________________
_______________________________________________________________________________________
Page 5 of 16
Instruction manual
.
1
General
Dear customers,
Thank you for your decision to buy our sensor products. You have chosen a high quality and extremely precise
torque measuring system.
This manual contains all the information necessary for you and the installation, operating and maintenance
personnel to use your measuring system under the intended conditions of use. It contains important
information to ensure proper and safe installation and operation.
For these reasons, the Instruction manual must always be available at the place of use of the torque
measuring system and always ready to hand.
We reserve the right to make changes in the course of product improvements. We try to maintain
compatibility with previous versions. All information without guarantee subject to technical changes.
For further questions we are of course also available after the purchase at any time.
Please use our contact address.
1.1
Customer service address
NCTE AG
Raiffeisenalle 3
D-82041 Oberhaching
Phone: +49 (0)89 665 619 0
Email:
Web:
1.2
Warranty
The warranty period is 12 months from the date of delivery from the factory, provided that the product is
used in accordance with its intended purpose, in compliance with the maintenance and calibration
regulations and the General Terms and Conditions of Business.
You can find these, current instruction manuals and data sheets on:
https://ncte.com/serienprodukte/
1.3
Scope of delivery
The torque sensor system consists of a calibrated sensor, signal acquisition / -processing integrated in the
housing, a 5 m long connection cable with plug (Binder plug no. 99-0426-10-08) and keystone (round shaft).
Enclosed you will find the corresponding calibration certificate and the warning notes.
