NCR XL15, User Manual, Page: 25 / 53

Chapter 2:
Hardware Installation
Installation Restrictions
Before installing the NCR XL15 (5915) Display, read and follow the guidelines in the
XL15 POS Site Preparation Guide and the NCR Workstation and Peripheral AC Wiring
Guide (BST0-2115-53).
• Install the display near an electrical outlet that is easily accessible. Use the power
cord as a power disconnect device.
• Do not permit any object to rest on the power cord. Do not locate the display where
the power cord can be walked on.
• Use a grounding strap or touch a grounded metal object to discharge any static
electricity from your body before servicing the display.
Warning: This unit contains hazardous voltages and should only be serviced by
qualified service personnel.
Caution:
This device should only be powered by a power supply source which
meets Safety Extra Low Voltage (SELV) and LPS (Limited Power Source)
requirements per UL1950, IEC 950, and EN 60 950. The power source must be
certified by the appropriate safety agency for the country of installation.
Caution:
Use a grounding strap when installing this feature.