NCR SelfServ XK32, Installation Manual

Page: 78 / 251

2-68 Hardware Installation
Installing the Floor Mount
The Floor Mount requires to be bolted to the floor using four anchor bolts and nuts. It is
the responsibility of the owning institution to provide the anchors to secure the kiosk.
For floor bolt holes and anchor details, refer to the NCR SelfServ™ XK32 (2247) Site
Preparation (BCC5-0000-5377).
To install the Floor Mount, perform the following steps:
1. Position the Floor Mount on the final installation location of the kiosk and mark the
floor mounting holes on the floor.
2. Remove the Floor Mount.