NCR 7350-K978, Kit Instructions, Page: 41 / 43

7350-K978 R6L Upgrade, Narrow Size Core 37
Routing and Sorting Cables
To route the cables in the NCR SelfServ Checkout Narrow Core unit, follow these steps:
1. Install all R6 Lite Narrow Core components. For more information, refer to
Installation Procedures on page 4.
2. Remove and sort existing 7350 cables. For more information, refer to Removing and
Sorting Cables on page 17.
Note: If upgrading to 7360 (R6) Tri–Light/Lane Light, unplug the 7350 (R5) Tri–
Light/Lane Light power cable from the power strip and then discard.
3. If R6 Lite cables are not yet routed in the unit, do the following:
• Route the Display cables. For more information, refer to Routing NCR 7702
Terminal Display Cables on page 29.
• Route the I/O Box cables. For more information, refer to Routing I/O Box Cables
on the previous page.
• Route the System Power Supply cables. For more information, refer to Routing
System Power Supply Cables on page 35.
Note: For more information about routing cables, refer to SCO R6 Lite (Narrow
Core) Routing Instructions (497-0520486).
4. At the back of the unit, identify and then group the cables using cable ties.
Example: Group cables that are connected to the Display and cables that are
connected to the I/O Box.
Note: For easier removal, do not include the Tri–Light/Lane Light cable in the
bundle.