NCM-1550-EM30 (1550nm externally modulated optical transmitter) operating manual
- 18 -
Then you input your connection name, such as “SNMP38400”
，
and choose the serial
port to connect with your equipment. As follows:
Press the “OK” button shows the configuration page of serial port. As follows:
Change the serial port configuration to 38400-baud rate, 8 data bits, no parity bit, 1
stop bit, no data flow control, press the “OK” button, you have set up the Windows
serial port Hyper Terminal.
You can click “file
→
save” menu to save this configuration of Hyper Terminal for
later using.
