NCast Presentation Recorder Reference Manual
if [ $# -ne 2 ]; then
echo "This script stops a Presentation Recorder session using the telnet interface."
echo "Synopsis: stop.sh address password"
exit
fi
ADDRESS=$1
PASSWORD=$2
( echo "IdTelnet,002,$PASSWORD"
sleep 1
echo "PE"
sleep 1
echo "QT"
sleep 1 ) | telnet $ADDRESS 7474 >& /dev/null
9.3. HTTP I
NTERFACE
– A
RCHIVE
D
OWNLOAD
Special HTTP commands are available to enable automatic or script downloading of archive files:
http://w.x.y.z/backup/list.cgi
Downloads a list of READY archive files
http://w.x.y.z/backup/download/file.mp4
Downloads an archive file
http://w.x.y.z/backup/download/file.xml
Downloads an archive xml file
http://w.x.y.z/backup/remove.cgi?file=file.mp4
Removes an archived file
where
file.mp4
The time-stamped archive filename obtained from the downloaded list (also .wmv or .ogg)
file.xml
The time-stamped xml file associated with an archive file.
Note that archive operations are username/password protected and this information must be supplied to
utilize these special URLs. The required username is “backup”. The password is entered on the
Configuration → Passwords web page (“HTTP API” entry). Removed files are immediately deleted, and not
stored in the trash can.
A comprehensive sample retrieval script follows:
#! /bin/tcsh
# Usage: PR720files.tcsh host password delete
#
# host - the hostname or IP address of the PR720 unit
# password - backup password for the unit
# delete - optional keyword to delete archived files after download
set PR720ip = $1
set passwd = $2
set deleteoption = $3
set verbosity = --quiet
#set verbosity = --non-verbose
#set verbosity = --verbose
if ($PR720ip == "") then
echo "PR720files: PR720 Host address or IP address missing"
echo "Usage: PR720files.tcsh host password"
exit
endif
if ($passwd == "") then
echo "PR720files: PR720 password required"
echo "Usage: PR720files.tcsh host password"
NCast Corporation
Revision 1.1
Page 86
