Organize your parts and hardware. You will need (2) people, a Phillips head screwdriver and rubber mallet.
800-558-1010
www.NBF.com
Tower w/ Doors • INSTRUCTIONS
CARTONS: ST3330, STD3033
Parts :
ST-A:
Back Panel
(30.25” x 28” x 1”)
Quantity: 1
ST-E:
Left Side
(15” x 31” x 1”)
Quantity: 1
ST-G:
Top
(29.5” x 15” x 1”)
Quantity: 1
ST-B:
Shelves
(28” x 13” x 1”)
Quantity: 2
ST-C:
Center Support
Quantity: 1
IMPORTANT NOTICE:
Place all wooden parts on a clean and smooth surface such as a rug or carpet to avoid the parts from being scratched.
Check to be sure that you have all parts and hardware.
Remove all wrapping materials, including staples & packing straps before you start to assemble.
Do not tighten all screws/bolts until completely assembled.
Keep all hardware parts out of reach of children.
Any problems or questions call Regency Office Furniture at 1-866-816-9822
Cam Lock Assembly:
To open Cam, point arrow
toward Cam Pin hole. To lock
Cam, turn clockwise.
Figure 1:
ST-H
ST-E
ST-D
DR-F
ST-G
ST-F
ST-H:
Base
(28” x 14.25” x 1”)
Quantity: 1
ST-F:
Right Side
(15” x 31” x 1”)
Quantity: 1
ST-D:
Foot Bracket
(15”D)
Quantity: 2
ST-C
DR-E:
Left Door
(14” x 30” x 1”)
Quantity: 1
DR-F:
Right Door
(14” x 30” x 1”)
Quantity: 1
DR-E
Tower w/ Doors
Page 1
