8
THESE NUTS
USED FOR
LEVELING
Figure 2
2. Assemble anchor system as follows: Thread nut
(#35) to bottom of threads on anchor bolt (#F) insert
threads of anchor bolt (#F) through hole on anchor
plate (#8) and secure with nut (F#35). Repeat this
step for the remaining anchor bolts. See Figure2
Note: Each anchor bolts should face the anchor bolt like
the right Figures. See Detail A
Note: It is recommended that you use some sort of concrete form for the top 4" of the concrete.
Cardboard forms can be purchased at some hardware and home stores or a wooden form can
be constructed out of 2 x 4's.
3. Mix and pour concrete into hole. Follow instructions on concrete bag. Stop about 18" below
court level.
4. Insert four reinforcement bars (#K) into concrete 8" apart creating a square in center on
hole.
5. Finish pouring concrete up to court level.
6. Push anchor system into concrete and agitate to work out voids in concrete. Immediately
use a level to level and square anchor plate to playing surface. Clean off any concrete that
may be on exposed threads.
Note: The bottom four nuts will be forever embedded in concrete. The top four nuts remain on
bolts and are used for leveling.
Let concrete stand for a MINIMUM of 72 hours.
