3.2.3. Lift car/s configuration (BVA 12 relays)
1. Click on the lift car device and adjust the relays and stops depending on how they are going to be
connected. In this example, relays 1, 2 and 3 have been used for Ground Floor, Floor 1 and Floor
2, respectively.
Pressing on
Check the connections
, it is possible to observe an example of the connection of the
buttons and relays.
2. From this step, it is compulsory to use the Nayar Systems App. Press the
LINK
button. The device
that is desired to link must be located near the Smartphone used for configuration.
Nayar Systems
BVA - 1_en
Page 23 of 29
