Start Up your NT-147
Charging the Battery
Parts Name and Function
NT-147
Quick Start Guide
NT-147
IR Remote Control
Car Charger
Stylus-Pen
AC Adaptor
Car-Holder
External Antenna
What's in the BOX
Support-CD
USB Client Cable
User Manual
Quick Start Guide
SD Card
Leather Case
●
●
●
●
●
●
●
●
●
●
●
●
●
front
top
bottom
back
Power
Destination
Direction Key / OK
Return
Zoom In
Zoom Out
Power Indicator LED
Main Menu
Reset
Stylus-Pen
Mini USB
External Antenna Jack
DC In
Antenna
Battery Switch
MIC
Speaker
right
left
SD Card Slot
IrDA
Volume Roller
Ear Phone Jack
Strap Link
Setting the battery switch to the ON position
Before starting to use your NT-147 for the first time, you
have to set the battery switch to the ON position. If the
switch is on the OFF position, alarm clock and time settings
will be initialized. Although data stored on the SD-Card are
still kept.
Insert SD-Card into your NT-147
Push the SD-Card carefully into the card slot. The labelled
side must point upwards. The memory card should slightly
lock in place. If you want to start the navigation software,
please ensure that the original SD-Card has been inserted
into the card slot.
There are two ways to charge your battery:
1.Connect the supplied AC adaptor to your NT-147 via
the DC in port.
2.Connect the USB
cable and the car
charger to your
NT-147 via the
Mini USB connector
as shown below.
(When the battery is fully charged,
the power LED will show green light.)
NT-147
ON
OFF
SD
