NavRoad X5, User Manual

Page: 137 / 142

137
Explorer
Press Explorer to launch file explorer. This function allows to browse through folders and files.
GPS Test
Thanks to this option you can run the tool that help you to diagnose built-in GPS module – check
the amount of satellites with which device is communicating, signal strength and quality.
GPS signal test should be made on open space. In enclosed space connection with satellites
will be impossible.
WARNING! If your device fails, don’t navigate you properly and you suppose it’s malfunction
run this diagnostic tool before trying to contact with technical support.
USB mode
Press USB Mode button to choose the method of connection to a computer. Two modes are
available – ActiveSync and MASS STORAGE – memory card reader mode.
If you want to copy your multimedia files to device, connect the device to a computer with
USB cable and select MASS STORAGE
About system
Press About system , to display information about firmware version. This function is not intended to
check the version of your navigation software.