6.
Click the map you want to install to your Navman. The map will change colour to a brighter
yellow
to
indicate it has been selected. To deselect a map, click the map again.
You may need to install multiple maps to cover the required geographical area.
7.
Complete the following:
If you want to …
Then …
install a
yellow
map
go back to step 6.
install a
red
map
the map needs to be activated via the Internet before it can
be installed; go back to step 4.
install the selected maps to your
Navman
continue to step 8.
8.
Select the destination media (Navman internal memory) for the selected maps, then click Install Maps.
The selected maps will be installed and change colour to
green
.
9.
To use your Navman, disconnect the USB cable. You may need to manually reset your Navman.
WARNING: Do not disconnect the USB cable from the Navman USB Socket until the installed
map or maps have changed colour to
green
.
How do I remove maps from my Navman?
1.
Open NavDesk, and then click My Maps.
2.
From the My Navman panel, select the check box next to the map you want to remove.
3.
Click Remove Maps to remove the selected maps.
4.
Confirm that you want to remove the selected map when prompted. The map is removed from your
Navman. You can reinstall these maps at any time via NavDesk.
Custom POIs
Depending on your Navman model, some Custom POIs features may not be available.
The Custom POIs (Points of Interest) application allows you to create or import your own POI files. These are
called custom POIs. Unlike preinstalled POIs, custom POIs can be removed from your Navman and can have
audio as well as visual alerts associated with them.
NavDesk
Æ
Custom POIs
41
