12 | Confidential
Vehicle’s Constant Power wire
The correct wire will have battery v12V (or +24V) present at all times, even when the
ignition key is in off position or removed.
Connect Qube’s red wire here.
Vehicle’s Ignition wire
The correct wire will have +12V (or +24V) present only when -- the key is in ON position, during
cranking and while motor is running.
Connect Qube’s pink wire here.
Note1:
After appropriate wires have been identified, it is strongly recommended that one of
the battery post cables is disconnected prior to making wire connections.
Note2:
If the vehicle has a master battery disconnect switch, Qube must be connected on the
battery (hot) side of that switch.
START
OFF
ACC
ON
Typical Ignition Key Cylinder
Identifying Correct Wires
Summary of Contents for Qube4
