Navman EZY260LMT, User Manual

Page: 82 / 94

81
Name Description

Display area Display the route on the map.
Note: You can also plan your route directly on the map.
How do I pre-plan a route by search?
1. From the Route planner panel, set your From and To points.
You can find a location by:
: Keyword
: Address
: Postcode
Enter your text for search and click to start a search. You may need to select from a
category list to narrow your search results.
2. Complete the following:
If you want to… Then…
add a waypoint, click Add Waypoint .
reset or remove a waypoint,
click next to the waypoint.
set the route preferences, click Route option and select:
ƒ
Mode : Select the desired mode to plan your route.
ƒ
Type of route : Select a way to plan your route.
ƒ
Avoidance : Avoid Unsurfaced roads , Toll
roads , Ferry routes , or Special zone on your
route.
Note: The Route option settings will only apply to the route
you are editing.
arrange the destinations in the
most efficient order while two or
more waypoints are included in the
planned trip, click Waypoint Optimisation .
3. Click Plan Route to calculate your route. The route will be displayed on the map.
4. Click Save this route . The route is saved to the Pre-Planned Routes section and your
Navman simultaneously.
How do I pre-plan a route using the map?
1. From the map displayed in the display area, click .
2. The cursor will be marked with “Add route.” Move the cursor and then click on the map
to set the From point.